Protective Gear

Foil Bags & CoverS

Customized bags and covers for your kite foil range

Produced to the highest manufacturing standards, the CORE Foil SLC also brings a rare simplicity to the kite foil discipline for improved on-water experiences. We apply the same principles when it comes to transporting your foil set-up, with various solutions now available for protecting your foil on the way to, or from, the beach.

When the foil is disassembled, CORE protective covers are available for each component, which can be fixed with Velcro in a secure position in the foil bag. Alternatively, you can use the wingsuit to optimally protect your hydrofoil when it’s fully assembled. For frequent travelers there is now also a unique quiver bag, in which you can store and protect your entire foil set-up, including the board.

FOIL QUIVERBAG 140 x 50

One bag for a complete kite foil set with two separate compartments

ALL IN

Our premium all-in-one foil bag solution. We make it easy to travel with your foil and foilboard. Store your board in one compartment (with the mounted mast if you choose). And pack your foil components in the other compartment that features handy velcro patches to secure the (optional) foil covers for the individual foil components. Now you're ready to conquer the world!

Dimensions: approx. 158 x 64 x 10 cm / 62'' x 25'' x 3''
Maximum board size: 140 x 51cm / 4'7" x 20"
Capacity: one kite foilboard and foil.
Weight: ca. 2,32 kg / 5,11 lbs

Optimal protection: Featuring 5mm PE foam padding with 10mm protection on the nose and tail.
Foil Compartment: Velcro spots to attach the optional foil covers keep the individual foil components in place. Expandable upholstery in the rear bag area plus an extra mast compartment offer more gear storage. Slide the mast with base in without damaging the board.
Board Compartment: A long velcro slot opening in the tail makes room for a mounted foil mast and a spacious inner pocket has plenty of room for leashes, tools, etc.

420-HD-Nylon: Specially coated, high-density nylon resists rips, dirt, and is lighter than polyester
PE Foil Fabric: Light, waterproof, and cleanable inner lining
#10 YKK Racquet Coil Zipper: Extra strong YKK zipper that's durable and abrasion-resistant
Polyester webbing: Our polyester belts are flexible and super tear-resistant

Optional:

Shoulder strap with non-slip, pre-curved shoulder pad.
Foil Cover Set

CORE Single Boardbags | Surf Detail Shot

CORE Single Boardbags | Twintip Detail Shot

Now available at your CORE retailer.

	PRICE*
Quiverbag Foil 140 x 50 cm	269 EUR
Shoulder Strap	15,90 EUR
SLC Bag & Cover Set 92 x 12 cm	249 EUR
SLC Bag & Cover Set 71 x 12 cm	249 EUR
*suggested retail price. Pricing may vary.

FOIL Single Boardbag

Premium boardbag to protect and transport a kite foilboard up to 4'5" (136cm) length

	PRICE
Single Boardbag Foil 4'5"x20"	129 EUR
Shoulder Strap	15,90 EUR
*suggested retail price. Pricing may vary.

Now available at your CORE retailer.

CORE Store FOIL Single Boardbag

All
FOIL Single Boardbag
DETAILS

Size: ca. 140 x 60 x 3 cm
Max. board size: 136 x 51cm / 4'5" x 20"
Gear: a Kite Foilboard (with or without mounted foil)

Optimal protection: Featuring 5mm PE foam padding and 10mm padding on the nose and tail of our surfboard bags.
Robust zipper: Our extra-large zipper opening with non-slip, colored zipper pulls offers quick access.
Internal abrasion protection against sharp fins.
Spacious inside pocket for fins, tools, wax, and leashes.
Surfboard bags feature an extra padded expandible tail to make room for a board with fins attached.

420-HD-Nylon: Our lightweight nylon features an extra-strong weave and unique finish to significantly improve tear-resistance and sensitivity to dirt over conventional polyester fabrics.
PE-Foil Fabric: Light, waterproof, and cleanable inner lining.
#10 YKK Racquet Coil Zipper #10: Our extra strong spiral zipper is designed for heavy-duty applications where abrasion resistance is critical.
Polyester webbings: Our polyester belts are flexible and super tear-resistant.

Optional: Shoulder strap with non-slip, pre-curved shoulder pad.

FOIL BAG & COVER SET

The perfect transport solution for your disassembled kite hydrofoil

FOIL BAG 110

Padded bag for protection and transport of a complete, disassembled kite hydrofoil

Dimensions: approx. 110 x 36 x 12 cm / 43 x 14 x 5 inches
Capacity: 1 CORE Foil Cover Set (Front Wing Cover, Stabilizer Cover, Mast Cover 90+70, Mast Base Cover, Tool Pouch)

Optimal protection: Solid 10mm wall padding plus CORE Foil Covers strong enough for air travel
Velcro patches: Matching CORE Foil Cover can be individually attached or removed
Name patch: Holds your business card and keeps your foil identified to prevent confusion

420 HD Nylon: Specially coated, high-density nylon resists rips, dirt, and is lighter than polyester.
PE-Foil Fabric: Light, waterproof and easy-clean inner lining.
#10 YKK Coil Zipper: Extra strong YKK zipper that's durable and abrasion-resistant.
Polyester Webbing: Our polyester belts are flexible and super tear-resistant.

FOIL BAG 125

Padded bag for protection and transport of a complete, disassembled kite hydrofoil

Dimensions: approx. 125 x 36 x 12 cm / 43 x 14 x 5 inches
Capacity: 1 CORE Foil Cover Set (Front Wing Cover, Stabilizer Cover, Mast Cover 90+70, Mast Base Cover, Tool Pouch)

Optimal protection: Solid 10mm wall padding plus CORE Foil Covers strong enough for air travel
Velcro patches: Matching CORE Foil Cover can be individually attached or removed
Name patch: Holds your business card and keeps your foil identified to prevent confusion

420 HD Nylon: Specially coated, high-density nylon resists rips, dirt, and is lighter than polyester.
PE-Foil Fabric: Light, waterproof and easy-clean inner lining.
#10 YKK Coil Zipper: Extra strong YKK zipper that's durable and abrasion-resistant.
Polyester Webbing: Our polyester belts are flexible and super tear-resistant.

FOIL COVER SET

Padded bags for protection and transport of each individual kite hydrofoil component

Dimensions:
Front Wing Cover 72 x 24: ca. 80 x 32 cm / ca. 32 x 12 inches
Stabilizer Cover 50 x 11: ca. 45 x 18 cm / ca. 18 x 7 inches
Fuselage Cover 70 x 4: ca. 77 x 10 cm / ca. 30 x 4 inches
Mast Cover 92 x 15: ca. 98 x 17 cm / ca. 38 x 7 inches
Mast Cover 82 x 15: ca. 84 x 17 cm / ca. 31 x 7 inches
Base Plate Cover: ca. 26 x 13 cm / ca. 10 x 5 inches
Tool Pouch S: ca. 25 x 13 x 8 cm / ca. 10 x 5 x 3 inches

Optimal protection: 5mm foam padding plus surrounding webbing binding protect the delicate edges of the foil parts
Fully CORE Foil Bag compatible: Each cover can be placed inside the optional CORE Foil Bag 110 or easily taken out for transport on the assembled foil
Tool Pouch S: This detachable zip pouch with light color lining ensures clear visibility inside and keeps all tiny bits and pieces like screws, nuts, tool etc. savely in one place
Screw pocket: This additional little pocket sewn on the Mast Cover 71/92 holds the foil screws and your Torx tool on the way to the water

High Density Nylon: Specially coated, high-density nylon resists rips, dirt, and is lighter than polyester
#10 YKK Coil Zipper: Extra strong YKK zipper that's durable and abrasion-resistant
PE-Foil Fabric: Light, waterproof and easy-clean inner lining
Polyester Webbing: Smoother and more tear-resistant

Now available at your CORE retailer.

	PRICE*
Wingfoil Bag and Cover Set	249 EUR
Bag 110x36	109 EUR
Front Wing Cover 72x24	39,90 EUR
Stabilizer Cover 40 x 11 cm	24,90 EUR
Fuselage Cover 70x4	19,90 EUR
Mast Cover 71 x 12 cm	39,90 EUR
Mast Cover 92 x 12 cm	39,90 EUR
Base Plate Cover 20 x 12 cm	14,90 EUR
Tool Pouch S	29,90 EUR
Shoulder Strap	15,90 EUR
* suggested retail price. Pricing may vary.

FOIL WINGSUIT 80

Padded premium cover for protection and transport of an assembled hydrofoil

FULL WING PROTECTION WITHOUT DISASSEMBLY

Protect your fully assembled foil until you're ready to go. Our Wingsuit 80 provides excellent protection to the front wing, stabilizer wing, and fuselage even when it's connected to the mast.

Dimensions: ca. 93 x 87 x 3 cm / ca. 60 x 21 x 1 inches
Max. wing size: ca. 80cm (Front Wing) 45cm (Stabilizer) / 32" (Front Wing) 18" (Stabilizer)
Gear: one assembled hydrofoil (Front Wing, Stabilizer, Fuselage)

Optimal protection: 5mm foam padding plus surrounding webbing binding (extra thick 10mm padding on nose + tail)
Quick and easy cover of the foil "plane" without disassembling the mast

420-HD-Nylon: Specially coated, high-density nylon resists rips, dirt, and is lighter than polyester
PE-Foil Fabric: Light, waterproof and easy-clean inner lining
#10 YKK Coil Zipper: Extra strong YKK zipper that's durable and abrasion-resistant
Polyester Webbing: Smoother and more tear-resistant

Now available at your CORE retailer.

CORE Store Wingsuit

	PRICE*
Wingsuit Foil 80x45	139 EUR
*suggested retail price. Pricing may vary.

PERFECT MATCH

More about CORE

6 month extended warranty with product registration. Click here for your chance to win!

6 year
replacement parts availability

Global
support

Protective Gear

Foil Bags & CoverS

Customized bags and covers for your kite foil range